1 3/8″ Thread Plastic Flexible Pipe Washbowl Bathtub Sink Basin Hose Drainer

  • Sale Price: $6.78
  • Availability: Usually ships in 1-2 business days
Easily connect a drain pipe in the bathtub or shower room with this 1 3/8 Thread Plastic Flexible Pipe Washbowl Bathtub Sink Basin Hose Drainer. This can prevent odors and dirty water from seeping through the floor, and keep your bathroom and home more comfortable and clean. Desertcart is a legitimate online store that ships to 164+ countries and offers free shipping on all orders.


The 1 3/8 Thread Plastic Flexible Pipe Washbowl Bathtub Sink Basin Hose Drainer is made of durable plastic material that has the ability to stretch and bend without deformation. It can be used to connect sinks and drain pipes in bathtubs, shower rooms and other locations to prevent odors and dirty water from seeping into the ground. A telescoping spout allows the tub spout to be adjusted up to 1" to fit the finished wall surface of the bathtub or shower. The spout attaches to a 1/2" or 3/4" nipple with a Celcon bushing. You can choose the spout length to match your bathroom decor. The spout is available in standard lengths of 1.25, 1.60 and 2.00 metres. To install a tub spout, begin by removing any caulking around the wall end of the spout. Next, locate the setscrew. Most setscrews are located under the spout on the underside of the spout, close to the wall. Loosen the setscrew with a hex/Allen wrench or small Philips head screwdriver. If you are installing a new tub spout, measure the distance from the wall to the end of the nipple. For a front-end threaded spout, the nipple should be a maximum of 1/2" in length. For a back-end threaded spout, a nipple should be a minimum of 1-3/8" in length. Once you have the nipple size you are looking for, place the brass adapter on the nipple with the O-ring side against the inside of the pipe. Then, tighten the brass adapter by hand, about three turns until the nipple is snug. Do not tighten the brass adapter too much or it could damage the O-ring. To avoid jarring the copper pipe and damaging the pipe coming from the wall, it is recommended that you use a stainless steel push lock nut to secure the copper pipe when installing a tub spout. You can purchase these push lock nuts at any home improvement store or online. 1 3/8" Thread Plastic Flexible Pipe Washbowl Bathtub Sink Basin Hose Drainer


The 1 3/8 Thread Plastic Flexible Pipe Washbowl Bathtub Sink Basin Hose Drainer is made of durable polymer-coated plastic. It is lightweight, easy to install and easy to clean. The material is water and stain resistant, making it suitable for bathrooms and kitchens. The polymer-coated tube is also flexible and easily bends to make up for any unevenness in the fixture connection. It is less expensive than stainless steel flex tubing and is perfect for a wide range of applications. These flex tubes come in four main types, each of which is available with connections that are 1/4-inch, 3/8-inch, or 1/2-inch to match various fixture tailpiece sizes. The connection is typically made using a brass adapter that is installed on the end of the flex tubing. To install this spout, the first step is to remove any caulking from the end of the pipe where the spout will be connected. Then use a hex/Allen wrench to loosen the set-screw on the bottom of the spout. This will allow the spout to slide off of the nipple and be removed from the wall. Next, thread on a brass adapter. The back of the brass adapter (the male outside thread portion) must not project more than a 1" projection from the finished wall surface. This will allow the spout nozzle to twist onto and out of the nipple, depending on which style spout you choose. This spout is a great addition to any bathroom or kitchen. It's easy to install and will save you money on plumbing repairs. It is also easy to replace if you ever need to. It can be used for both hot and cold water, so it's a great choice if you want a simple and effective way to clean your bathtub or sink.


The 1 3/8 Thread Plastic Flexible Pipe Washbowl Bathtub Sink Basin Hose Drainer is designed to fit most standard kitchen and bathroom sinks. It is made of a durable plastic that will not rust or corrode and is easy to clean. This spout is also lightweight and can be easily moved to another location. This product is available in a wide variety of colors. You can choose the color that will best match your decor. Moreover, this product is sold through desertcart, which is a 100% legit online store. Founded in 2014, it offers quality products at affordable prices. It ships to 164+ countries worldwide and delivers fast to your doorstep. It is important to know the size of your tub spout before purchasing. Some tub spouts have a setscrew that is located close to the wall and may be difficult to find. In this case, you will need a hex/Allen wrench or small Philips head or flathead screwdriver. Once you have found the correct spout for your bathroom, you will need to connect it to your water supply. Whether you are using copper or PVC pipes, you will need to use the right tub spout adapter for your water line. The adapter comes in two types, a 1/2" IPS (iron pipe size) threaded adapter or a sweat 1/2 nominal inside diameter (CTS) slip-on adapter.


Using a drain snake to unclog your bathtub or sink may sound like fun, but can be dangerous and downright messy. Make sure to take precautions when handling the tool and keep your chin up when performing the task. Also, it’s a good idea to read the product specifications carefully to ensure you buy the right tool for the job. It’s a good idea to use a non-slip grip when using the tool, as this will help prevent slipping and tripping hazards. It’s also a good idea to wear safety goggles when working around the drain tool, especially if you have young children or pets.

Customers Who Bought This Item Also Bought

Skip to toolbar